Aggresive Breakcore Sound
Moderators: PEPCORE, SweetPeaPod, BreakforceOne, JohnMerrik
19 posts
• Page 1 of 2 • 1, 2
Aggresive Breakcore Sound
Any tips on how to give a breakcore song some attitude, energy, or "Ooomph"? I can attempt to make some breakcore tunes, but they lack the aggressive energy heard in songs like "Cripplefight" and others.
Any Suggestions?
Any Suggestions?
when i use drumsounds i layer them with hard kicks sometimes, not necessarily gabber kicks or whatnot, but just really heavy sounding hits, used in tandem with constant but not overlapping bass this may be able to give your tracks what they need.
another thing i suggest is not to crowd your tracks with too many overlapping sounds, this will take away from any individual sound's importance
once you have something that sounds like it has potential you might try using a compressor a limiter or both to take down the difference between the peaks of your sounds and the volume of the rest of the sounds, this will, if done right, make everything louder but keep the track from unwanted distortion which often follows many overlapping sounds
eq'ing of specific sounds, snares, kicks etc. could possibly work in your favor, as could just finding the right sounds/samples
sometimes when i want a kick and a snare at the same time as a gabber kick, i will overlap the three, eq the snare to have no lows, then delete the very begining of the gabber kick so my sounds dont distort from overlapping, the end result being a sound that has the umph of a great kick, the smack of a snare, and the accompaniment of a residing gabber kick/bass to follow it up
hope any of this helps!
another thing i suggest is not to crowd your tracks with too many overlapping sounds, this will take away from any individual sound's importance
once you have something that sounds like it has potential you might try using a compressor a limiter or both to take down the difference between the peaks of your sounds and the volume of the rest of the sounds, this will, if done right, make everything louder but keep the track from unwanted distortion which often follows many overlapping sounds
eq'ing of specific sounds, snares, kicks etc. could possibly work in your favor, as could just finding the right sounds/samples
sometimes when i want a kick and a snare at the same time as a gabber kick, i will overlap the three, eq the snare to have no lows, then delete the very begining of the gabber kick so my sounds dont distort from overlapping, the end result being a sound that has the umph of a great kick, the smack of a snare, and the accompaniment of a residing gabber kick/bass to follow it up
hope any of this helps!
- ErotiCore SteNch
- Posts: 46
- Joined: Fri Nov 06, 2009 12:00 am
- Location: Denmark
divtech wrote:when i use drumsounds i layer them with hard kicks sometimes, not necessarily gabber kicks or whatnot, but just really heavy sounding hits, used in tandem with constant but not overlapping bass this may be able to give your tracks what they need.
another thing i suggest is not to crowd your tracks with too many overlapping sounds, this will take away from any individual sound's importance
once you have something that sounds like it has potential you might try using a compressor a limiter or both to take down the difference between the peaks of your sounds and the volume of the rest of the sounds, this will, if done right, make everything louder but keep the track from unwanted distortion which often follows many overlapping sounds
eq'ing of specific sounds, snares, kicks etc. could possibly work in your favor, as could just finding the right sounds/samples
sometimes when i want a kick and a snare at the same time as a gabber kick, i will overlap the three, eq the snare to have no lows, then delete the very begining of the gabber kick so my sounds dont distort from overlapping, the end result being a sound that has the umph of a great kick, the smack of a snare, and the accompaniment of a residing gabber kick/bass to follow it up
hope any of this helps!
hi divtech what distortion do you use on your stuff,really like the distortion on the samplepack you posted in another thread
- HORSE FORCE
- The Horse Lord!
-
- Posts: 556
- Joined: Thu Nov 01, 2007 12:00 am
- Location: Killwaukee, Wisconsin
divtech wrote:another thing i suggest is not to crowd your tracks with too many overlapping sounds, this will take away from any individual sound's importance
this ^^
good suggestions divtech!
i would add that layering should only be done when you are missing something. way too often i hear younger producers who hear two sounds "woah these are both awesome! lets put them TOGETHER" and then end up cancelling out frequencies. never blend drum sounds that are similar in sonic characteristics. if you have a snare that has a real crispy high end, try blending it with a deeper, thumpier snare to get a more full snare sound. also, filtering out the bottom end (like around 80-120 hz, somehwere in there) is key when youre using sub bass. sub bass will step all over your kicks unless you do this. also, something i have been doing for a while now that COMPLETELY changed my production is looking at the waveforms of songs when you are listening to them. take a really good-sounding breakcore track and open it in a program like audacity where you can see the waves. most good producers will have tiny gaps in between consecutive drum hits (pitched snare rolls etc.) this is achieved by setting the release evelope on your sampler as low as possible, then shift-dragging the drums to have a little bit of space between them. (try doing this with my tracks and you'll see what i mean
![Wink :wink:](./images/smilies/icon_wink.gif)
Abuse a compressor. I mean high threshold and ratio. Keep the relase down at first then move the attack about. You'll find a sweet spot where the drums seem to jump out and slap you in the face. Then mess with the release time until it sounds a bit more, er... 'natural'. Then ease off your threshold and ratio until it sounds right. I keep going back and forth until I'm happy. Try it on on breaks, your drums buss/groups, and individual hits. Also, parallel processing is really helpful. I think parallel distortion/saturation and compression works well. Experiment with other stuff to see what works for you
ErotiCore SteNch wrote:divtech wrote:when i use drumsounds...
hi divtech what distortion do you use on your stuff,really like the distortion on the samplepack you posted in another thread
sorry i just saw this, hopefully my reply will not go unheard
diff types, i really like ohmicide but for that sample pack i ran much of the sounds through a distortion pedal outside of the computer, disto pedals are def a fun thing to keep around
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- kowalczyk
-
- Posts: 138
- Joined: Sat Mar 28, 2009 12:00 am
- Location: IN THE GETTHOOOOO
- Average track rating: 3.0/5 out of 1 votes
19 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 51 guests